62 Controlling Your System at the Analog Ports
4
Click
Inlets
.
5
Enter an integer in the
Minimum Amps
or
Maximum Amps
fields.
6
Click
OK
.
PDU Outlets window
From the Outlets window, you can select an outlet and open the Outlet
Settings window to set outlet-specific parameters.
NOTE: You can only modify outlet parameters on a PDU that is currently online.
To view/modify PDU Outlet settings:
1
to launch the OSCAR interface. The
Main
dialog
box appears.
2
Click
Setup - PDUs
.
3
Complete one of the following steps:
Select a PDU name, then click
Settings
to open the
PDU Settings
window.
-or-
Select a PDU name, then press <Enter> to open the
PDU Settings
window.
-or-
Double-click on the PDU name to open the
PDU Settings
window.
4
Click
Outlets
.
5
Complete one of the following steps:
Select an outlet, then click
Settings
to open the
Outlet Settings
window.
-or-
Select an outlet, then press <Enter> to open the
Outlet Settings
window.
-or-
Double-click an outlet to open the
Outlet Settings
window.
6
Select the outlet you wish to modify.
7
Complete any of the following steps:
a
In the
Name
field, enter the Outlet name.
To Next Page
Loading...
