46 Controlling Your System at the Analog Ports
To access the Flag dialog box:
1
to launch the OSCAR interface. The
Main
dialog
box appears.
2
Click
Setup - Flag
. The
Flag
dialog box displays.
Figure 3-5. Flag Dialog Box
To determine how the status flag is displayed:
1
Select
Name
or
EID
to determine what information will be displayed.
2
Select
Displayed
to show the status flag.
3
(Optional) Select
Timed
to display the status flag for only five seconds
after switching.
4
Select a status flag color in
Display Color
.
5
In
Display
Mode
, select
Opaque
for a solid color status flag or select
Transparent
to see the desktop through the status flag.
6
To position the status flag on the desktop:
a
Click
Set Position
to gain access to the
Set Position Flag
screen.
b
Click on the title bar and drag to the desired location.
-or-
Use the left and right arrows to nudge the status flag to the desired
location and press <Enter>.
c
Right-click to return to the
Flag
dialog box.
To Next Page
Loading...
