Dell PowerEdge M1000e - Logging in to the CMC Using the Web-Based Interface

Initial System Configuration 31
3 Configure the CMC network settings:
–
To set a static IP address , type
setniccfg -s <IP address><network mask><gateway>
and press <Enter>.
Use the appropriate settings for your network.
–
To configure the CMC to obtain an IP address using DHCP , type
setniccfg -d
and press <Enter>.
The new network settings are activated in a few seconds after configuring
the network.
Logging in to the CMC Using the Web-Based Interface
1 Open a supported Web browser window.
For more information, see "Supported Web Browsers" in the CMC
User’s
Guide
.
2 Log in to the CMC.
–
If the CMC is accessed using a specific IP address , type the following
URL in the
Address field, and then press <Enter>:
https://<CMC IP address>
The default IP address for the CMC is 192.168.0.120. If the default
HTTPS port number (port 443) has been changed, type:
https://<CMC IP address> :< port number >
where <IP address > is the IP address for the CMC and port
number
is the HTTPS port number.
–
If you access the CMC using a registered DNS name, type the CMC’s
name:
https://<CMC name >
By default, the CMC name on the DNS server is cmc-<service
tag>
.
The CMC
Login page is displayed.
book.book Page 31 Wednesday, March 9, 2011 3:11 PM