Configuring the I/O Modules 79
10 Gb Ethernet Pass-Through Module II
The Dell 10 Gb Ethernet pass-through module II supports 10 Gb connections
and provides a direct connection between the optional internal Ethernet
mezzanine card in the blade and an external Ethernet device. The Ethernet
pass-through modules are hot-swappable and may be installed in Fabric B or
Fabric C.
The 10 Gb Ethernet pass-through module II enables you to use optical SFP+
(short reach or long reach) and direct-attached copper (DCA) SFP+
modules. The Ethernet pass-through module does not support 1G mezzanine
or network daughter cards in blades.
book.book Page 79 Wednesday, March 9, 2011 3:11 PM
To Next Page
Loading...
