Configuring the I/O Modules 81
10 Gb Ethernet Pass-Through I/O Module
The 10 Gb Ethernet pass-through module supports 10 Gb connections
and provides a direct connection between the optional internal Ethernet
mezzanine card in the blade and an external Ethernet device. The Ethernet
pass-through modules are hot-swappable and may be installed in Fabric B or
Fabric C.
The 10 Gb Ethernet pass-through I/O module enables you to use optical SFP,
SFP+, and direct-attached copper (DCA) SFP+ modules. To operate the I/O
module and the SFP+ modules at 10 Gbps,
you must use either optical SFP+
short reach (SR), long reach multimode (LRM), or DCA SFP+ modules.
This
module does not support 1G mezzanine or network daughter cards in blades.
book.book Page 81 Wednesday, March 9, 2011 3:11 PM
To Next Page
Loading...
