Dell PowerEdge M1000e - Identifying Midplane Version

Configuring the I/O Modules 49
For more information about I/O module installation guidelines, see your
Hardware Owner’s Manual.
Identifying Midplane Version
The version of the midplane installed in the enclosure is displayed in the
Midplane Revision field under the Summary tab of the CMC web-based
interface.
You can also view the icons at the back of the enclosure to identify the version
of the midplane. See Table 3-1.
Table 3-1. Identifying Midplane Version
See Figure 3-2 and Figure 3-3 to locate the midplane identification labels on
the enclosure.
Marking Description Midplane Version
I/O module slots A1, A2 1.1
I/O module slots B1, B2, C1,
and C2
1.1
I/O module slots A1, A2 1.0
I/O module slots B1, B2, C1,
and C2
1.0
book.book Page 49 Wednesday, March 9, 2011 3:11 PM