Dell PowerEdge R330 - Installing a 2.5-inch hard drive blank

2. If installed, remove the front bezel.
Steps
Press the release button and slide the hard drive blank out of the hard drive slot.
Figure 26. Removing a 2.5-inch hard drive blank
1. hard drive blank 2. release button
Next steps
If removed, install the front bezel.
Related links
Removing the optional front bezel
Installing the optional front bezel
Installing a 2.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 27. Installing a 2.5-inch hard drive blank
1.
hard drive blank
Next steps
If removed, install the front bezel.
67