Dell PowerEdge R330 - Page 97

4. If required, connect the cables to the expansion card.
Figure 58. Installing the expansion card in the expansion card riser
1. touch point (2) 2. expansion card riser connector
3. expansion card riser 4. expansion card
Figure 59. Installing the expansion card in the expansion card riser
1.
PERC card 2. expansion card connector on the riser
3. touch point (2) 4. expansion card riser
5. LED connector on the system board 6. LED cable
7. LED connector on the PERC card
Next steps
1. Install the expansion card riser.
97