Code Text Causes Corrective action
E2021 Memory Population Incorrect memory
configuration. Memory
population order incorrect.
Check for specific error messages.
Escalate for possible memory or
server replacement.
E2022 POST Fail General failure after video. Check for specific error messages.
E2110 MBE Crd # DIMM
## & ##
One of the DIMMs in the set
implicated by "## & ##" has
had a memory multi-bit error
(MBE). If no memory card is
present, the "Crd #" string is
left out of the message.
Escalate for possible memory or
server replacement.
E2111 SBE Log Disable
Crd # DIMM ##
The system BIOS has
disabled memory single-bit
error (SBE) logging, and will
not resume logging further
SBEs until the system is
rebooted. "##" represents the
DIMM implicated by the
BIOS. If no memory riser
card is present, the "Crd #"
string is left out of the
message.
Escalate for possible server
replacement.
E2113 Mem Mirror Crd #
DIMM ## & ##
The system BIOS has
disabled memory mirroring
because it has determined
that one half of the mirror has
had too many errors. "## &
##" represents the DIMM pair
implicated by the BIOS. If no
memory card is present, the
"Crd #" string is left out of the
message.
Escalate for possible memory or
server replacement.
I1910 Intrusion System cover removed. Information only.
I1911 >3 ERRs Chk Log LCD overflow message. A
maximum of three error
messages can display
sequentially on the LCD. The
fourth message displays as
the standard overflow
message.
Information only.
I1912 SEL Full System Event Log is full of
events, and is unable to log
any more events.
Clear the log by deleting event
entries.
W1228 ROMB Batt < 24hr Warns predictively that the
RAID battery has less than
24 hours of charge left.
Information only.
Table continues…
Maintaining and Troubleshooting the Dell
™
PowerEdge
™
R610 Server
22 Maintaining and Troubleshooting the Dell
™
PowerEdge
™
R610 Server November 2010
Comments on this document? infodev@avaya.com
To Next Page
Loading...
