16 About Your System
4 LCD panel Provides system ID, status
information, and system error
messages.
The LCD lights during normal
system operation. Both the systems
management software and the
identification buttons located on the
front and back of the system can
cause the LCD to flash blue to
identify a particular system.
The LCD lights amber when the
system needs attention, and the
LCD panel displays an error code
followed by descriptive text.
NOTE: If the system is connected to
AC power and an error has been
detected, the LCD lights amber
regardless of whether the system has
been powered on.
5 USB connectors (2) Connects USB devices to the system.
The ports are USB 2.0-complaint.
6 Video connector Connects a monitor to the system.
7 Hard drives (2) One or two 2.5-inch hot plug
8 Optical drive
(optional)
One optional slim-line SATA
DVD-ROM drive or DVD-RW drive,
or combination CD-RW/DVD drive
(when available).
NOTE: DVD devices are data only.
Table 1-2. Front-Panel LED Indicators, Buttons, and Connectors (continued)
Item Indicator, Button, or
Connector
Icon Description
To Next Page
Loading...
