Dell PowerEdge R815 - NIC Indicators; Side View; Power Supply Status; Figure 5. Side View

Dell
PowerEdge R815 Technical Guide 15
Table 3. Power Supply Status
LED Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
↔
PSU mismatch (when hot-
plugged/swapped)
3.6 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter in the PowerEdge R815
Hardware Owner’s Manual.
3.7 Side View
Figure 5. Side View