Dell PowerEdge R815 - Power Supply Specifications; Environmental Specifications

Dell
PowerEdge R815 Technical Guide 23
4.4 Power Supply Specifications
Power Supply Specifications are detailed in Table 4.
Table 4. Power Supply Specifications
AC Power Supply (per power supply)
Wattage 1100 (1023, low line)
Voltage 90-264 VAC, auto-ranging, 47-63Hz
Maximum inrush current Under typical line conditions and over the entire system
ambient operating range, the inrush current may reach 55 A per
power supply for 10 ms or less
The R815 Power Supply is certified Gold (80 Plus) and Climate Savers 3. It is certified UL approved
and incorporates PFC logic.
4.5 Environmental Specifications
Environmental specifications are detailed in Table 5.
Table 5. Environmental Specifications
Temperature
Operating 10° to 35°C (50° to 95°F) with a maximum temperature
gradation of 10°C per hour
Note: For altitudes above 2950 feet, the maximum operating
temperature is derated 1°F/550 ft.
Storage -40° to 65°C (-40° to 149°F) with a maximum temperature
gradation of 20°C per hour
Relative humidity
Operating 20% to 80% (noncondensing) with a maximum humidity gradation
of 10% per hour
Storage 5% to 95% (noncondensing) with a maximum humidity gradation
of 10% per hour
Maximum vibration
Operating 0.26 Grms at 5-350 Hz in operational orientations
Storage 1.54 Grms at 10-250 Hz in all orientations
Maximum shock
Operating Half sine shock in all operational orientations of 31 G +/- 5%
with a pulse duration of 2.6 ms +/-10%
Storage Half sine shock on all six sides of 71 G +/- 5% with a pulse
duration of 2 ms +/-10%
Square wave shock on all six sides of 27 G with velocity change
@ 235 in/sec or greater