72 Installing System Components
Figure 3-18. Removing and Installing an Expansion Card
7
Close the card retention door to secure the remaining card(s) in the
system. See Figure 3-18.
8
Close the system. See "Closing the System" on page 47.
9
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
10
Remove the card’s device driver from the operating system.
1 expansion card 2 alignment guide
3 card retention door 4 release tab
book.book Page 72 Wednesday, June 24, 2009 8:21 AM
To Next Page
Loading...
