Jumpers and Connectors 131
6
Jumpers and Connectors
System Board Jumper
For information on resetting the password jumper to disable a password, see
"Disabling a Forgotten Password" on page 134.
Table 6-1. System Board Jumper Settings
Jumper Setting Description
PWRD_EN (default) The password feature is enabled
(pins 2–4)
The password feature is disabled
(pins 4–6)
NVRAM_CLR (default) The configuration settings are retained at system
boot (pins 3–5)
The configuration settings are cleared at the next
system boot (pins 1–3)
Coaster_HOM.book Page 131 Monday, November 3, 2014 3:23 PM
To Next Page
Loading...
