Installing System Components 79
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
CAUTION: Never operate your system with the cooling shroud removed.
Overheating of the system can develop quickly, resulting in shutdown of the
system and loss of data.
Removing the Cooling Shroud
1
Turn off the system and attached peripherals. Disconnect the system from
the electrical outlet and peripherals.
2
Open the system. See "Opening the System" on page 59.
3
Remove the expansion-card stabilizer. See "Removing the Expansion-Card
Stabilizer" on page 78.
4
Hold the touch points on the cooling shroud and lift the cooling shroud
out of the system. See Figure 3-15.
Coaster_HOM.book Page 79 Monday, November 3, 2014 3:23 PM
To Next Page
Loading...
