13. Pull the backplane release pins in the direction of the system board and lift the backplane from the chassis.
Figure 78. Removing and Installing the 2.5 inch (x25) Hard-drive Backplane
1. hard-drive connectors (25) 2. release pins (2)
3. SAS cables on backplane expander board (2) 4. power cables (2)
5. backplane expander board 6. hard-drive backplane
Figure 79. Back View of the 2.5 inch (x25) Hard-drive Backplane
1. release pins (2) 2. slots for chassis hooks (10)
3. backplane expander board connectors (6) 4. guide pins for the backplane expander boards
(4)
5. backplane expander board brackets (2) 6. power cable connectors (2)
120