Chassis Status Server Module Status Expansion Card Status
On Off Off
On On Off
NOTE: The system cover must be
installed for the new expansion
card to power on.
NOTE: To verify if a PCIe slot is powered on, see PCIe Slot Indicators.
PCIe Slot Indicators
The expansion-card slots are warm-plug. A PCIe card has to be prepared for removal from a system that is turned on,
using the CMC. The PCIe slot indicators show that a PCIe card is ready for removal.
Figure 58. PCIe Slot Indicators
1. PCIe slot indicators for low-profile expansion cards 2. PCIe slot indicators for full-height expansion cards
The PCIe slot indicators provide the following information:
Indicator Description
Slot power indicator
Steady Green The slot is receiving power.
Blinking Green Warm-plug operation is in progress and insertion or removal of the
adapter is not allowed.
Off Power supply to the slot is off, and the expansion card can be
removed.
87
To Next Page
Loading...
