Dell PowerVault MD1000 - Enclosure Bezel Indicators

8 About Your System
Indicators on the Enclosure Bezel
An optional locking bezel can be installed on the front of the enclosure to limit access. Figure 1-1
illustrates the indicators and components on the bezel. Table 1-1 lists conditions indicated by the lights on
the bezel.
For information on installing and removing the bezel, see "Removing and Replacing the Front
Bezel."
Figure 1-1. LEDs on the Front Bezel
Table 1-1. Front Bezel Indicators
Item LED Indicator LED Icon Condition
1 Split mode (green) When lit, indicates the enclosure is in split mode;
otherwise, the enclosure is in unified mode. For more
information on both modes, see “Unified Mode and Split
Mode.”
2 Power (green) When lit, at least one power supply is supplying power to
the enclosure.
3 Enclosure status
(blue/amber)
Steady amber: Power is on and enclosure is in reset state
Steady blue: Power is on and enclosure status is OK.
Flashing blue: Host server is identifying the enclosure.
Flashing amber: Enclosure is in fault state.
1
2
3