214 Management: Firmware Downloads
• Make sure that the firmware that you download to the physical disks are
compatible with the physical disks that you select.
• Do not make any configuration changes to the storage array while
downloading the firmware.
NOTE: Downloads can take several minutes to complete. During a download, the
Download Physical Disk - Progress dialog is displayed. Do not attempt another
operation when the Download Physical Disk - Progress dialog is displayed.
To download Physical Disk Firmware:
1
From the AMW, select
Advanced
Maintenance
Download
Physical Disk.
The
Download Physical Disk - Introduction
window is displayed.
2
Click
Next
.
The
Download Physical Disk Firmware - Add Packages
window is
displayed.
3
In the
Selected Packages
area, click
Add
.
4
Navigate to the location of the packages and click
OK
.
The selected package is added to the
Packages to be transferred
area.
5
Click
Next
.
The
Download Physical Disk Firmware - Select Physical Disks
window is
displayed.
6
In the
Compatible Physical Disks
tab, select the appropriate physical
disks or
Select all
the physical disks.
The
Confirm Download
dialog is displayed.
7
Ty p e
yes
and click
OK
.
The
Download Physical Disk Firmware - Progress
window displays the
progress of physical disk firmware download.
8
After the firmware download is complete, click
Close
.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
book.book Page 214 Tuesday, September 27, 2011 3:13 PM
To Next Page
Loading...
