Troubleshooting: Your Storage Array Software 255
Event Log
You can use the Event Log Viewer to view a detailed list of events that occur
in a storage array. The event log is stored on reserved areas on the storage array
disks. It records configuration events and storage array component failures.
WARNING: Use this option only under the guidance of your Technical Support
representative.
The event log stores approximately 8000 events before it replaces an event
with a new event. If you want to keep the events, you may save them, and
clear them from the event log.
The event log shows two types of event views:
• Summary view—Shows an event summary in a tabular format.
• Detail view—Shows details about a selected event.
To view the event log:
1
In the AMW, select
Advanced
Troubleshooting
View Event Log
.
The
Event Log
is displayed. By default, the summary view is displayed.
2
To view the details of each selected log entry, select
View details
.
A detail pane is added to the event log that contains detailed information
about the log item. You can view the details about a single log entry at a
time.
3
To save the event log, click
Save As
.
The
Save Events
dialog is displayed.
4
Navigate to the relevant folder, enter the relevant
file name
, and click
Save
.
5
To erase all log entries from the event log, click
Clear All
.
6
To exit the event log, click
Close
.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
book.book Page 255 Tuesday, September 27, 2011 3:13 PM
To Next Page
Loading...
