Steps
NOTE:
When removing the WLAN card from the system, if the adhesive pad which helps secure the WLAN card in place is
removed from the system along with the WLAN card, adhere it back to the system.
1. Loosen the single captive screw that secures the WLAN card bracket to the WLAN card.
2. Slide and remove the WLAN card bracket off the WLAN card.
3. Disconnect the antenna cables from the WLAN card.
4. Slide and remove the WLAN card from the WLAN card slot.
Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
24
Removing and installing components
To Next Page
Loading...
