Steps
1. Place the dummy SIM-card slot filler into its compartment on the palm rest.
NOTE: Ensure that the dummy SIM-card slot filler is aligned with the ribs on the palm-rest assembly.
2. Press the dummy SIM-card slot filler until it clicks into place and ensure it fits securely into the SIM card slot.
Next steps
1. Install the display assembly.
2. Install the keyboard assembly
3. Install the smart card reader.
4. Install the system board.
5. Install the battery.
6. Install the system fan.
7. Install the assembly inner frame.
8. Install the WWAN card.
9. Install the WLAN card.
10. Install the base cover.
11. Install the microSD card.
12. Install the SIM card.
13. Follow the procedure in After working inside your computer.
Palm-rest assembly
Removing the palm-rest assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
88
Removing and installing components
To Next Page
Loading...
