Engineering specifications
Ethernet
Intel Ethernet Connection i219-LM
The following table lists the i219-LM specifications.
Table 32. Intel Ethernet Connection i219-LM specifications
Feature Values
External connector type RJ45
Data rate 10/100/1000 Mbps
Controller Details
Controller bus architecture PCI Express base specification revision 1.1
Integrated memory Yes
Data transfer mode Yes (Bus-Master DMA)
Power consumption (Full operation per data rate connection
s
peed)
542 mW (Max)
Power consumption (Standby operation) 76 mW (Max)
IEEE standards compliance 802.3
Hardware certifications N/A
Boot ROM support EEPROM (Located in SPI)
Network Transfer Mode
Network transfer rate 10 Mb (full/half-duplex)
10BASE-T (full-duplex) 20 Mbps 100 Mb (full/half-duplex)
100BASE-TX (half-duplex) 100 Mbps 1000 Mb (full-duplex)
Environmental
Operating temperature range 0°C–85°C (32°F–185°F)
Operating humidity 20% to 80% (non condensing)
Operating system driver Support
● Windows (x64)
● Ubuntu
● Neokylin
Manageability
● Wakeup On LAN
● PXE 2.1
Management capabilities alerting Optional Intel Standard Manageability (must be made at time
o
f purchase).
This term does not connote an actual operating speed of 1 Gb/sec. For high-speed transmission, connection to a Gigabit
E
thernet server and network infrastructure is required.
3
Engineering specifications 31
To Next Page
Loading...
