Dell Precision 5530 2-in-1 User Manual

Create a USB recovery drive for Windows
Create a recovery drive to troubleshoot and x problems that may occur with Windows. An empty USB ash drive with a minimum capacity
of 16 GB is required to create the recovery drive.
NOTE: This process may take up to an hour to complete.
NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for
latest instructions.
1 Connect the USB ash drive to your computer.
2 In Windows search, type Recovery.
3 In the search results, click Create a recovery drive.
The User Account Control window is displayed.
4 Click Yes to continue.
The Recovery Drive window is displayed.
5 Select Back up system les to the recovery drive and click Next.
6 Select the USB ash drive and click Next.
A message appears, indicating that all data in the USB ash drive will be deleted.
7 Click Create.
8 Click Finish.
For more information about reinstalling Windows using the USB recovery drive, see the Troubleshooting section of your product's
Service Manual at www.dell.com/support/manuals.
2
Create a USB recovery drive for Windows 7

Dell Precision 5530 2-in-1 Specifications

General

Operating System	Windows 10 Pro
Processor	8th Generation Intel Core i5-8305G, i7-8705G
Display	3840 x 2160
RAM	Up to 32GB DDR4-2400MHz
Storage	PCIe NVMe SSD
Ports	2 x Thunderbolt 3, 2 x USB 3.1, HDMI 2.0, SD card reader
Battery	6-cell 75WHr integrated battery
Weight	4.36 lbs
Wireless	Bluetooth
Camera	720p HD webcam
Graphics	Radeon™ RX Vega M GL Graphics with 4GB HBM2 dedicated memory