4. Connect the power-adapter port cable, speaker cable, keyboard-control board cable, touchpad cable, and touch-screen
cable to the system board.
5. Connect the display cable to the system board.
6. Align the display-cable bracket with the screw hole on the system board and replace the screw (2).
7. Install the:
a. Memory
b. SSD
c. Keyboard
d. Heatsink assembly
e. Fans
f. Hard drive(optional)
g. WLAN card
h. Battery
i. Base cover
8. Follow the procedures in After Working Inside Your Computer.
Audio board
Removing Audio board
Steps
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. base cover
b. battery
c. WLAN card
d. hard drive
e. fans
f. heatsink assembly
g. memory modules
h. system board
3. Perform the following steps to remove the audio board:
a. Turn the system board over.
34
Disassembly and reassembly
To Next Page
Loading...
