Installing the Palm rest Assembly
Steps
1. Align the palm rest assembly on the display assembly.
2. Tighten the screws to secure the display hinges to the palm rest assembly.
3. Press down on the palm rest assembly to close the display.
4. Install the:
a. keyboard
b. system board
c. power connector port
d. display assembly
e. fans
f. heatsink assembly
g. speakers
h. WLAN card
i. hard drive(optional)
j. memory modules
k. battery
l. base cover
5. Follow the procedures in After Working Inside Your Computer
48 Disassembly and reassembly
To Next Page
Loading...
