Dell Precision 5570 W3D04 - Page 61

Table 5. System setup options—Integrated Devices (continued)
Integrated Devices
Default: OFF
Video/Power only on Type-C Ports Enables or disables USB4 PCIe Tunneling.
Default: OFF
Miscellaneous Devices Enables or disables various onboard devices.
Enable Camera Enables or disables the camera.
By default, Enable Camera is selected.
Touchscreen Enables or disables the touchscreen.
By default, Touchscreen is selected.
Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device.
By default, Enable Fingerprint Reader Device is selected.
Table 6. System setup options—Storage menu
Video
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated storage device controller.
Storge Interface
Port Enablement Select to enable the devices.
Smart Reporting
Enable Smart Reporting Select to enable the Smart reporting.
Drive Information
Drive Information Provides the information of the drives installed in the computer.
Enable MediaCard
Enable MediaCard Select to enable or disable the media card
Table 7. System setup options—Security menu
Security
Enable Admin Setup Lockout Enables or disables the user from entering BIOS Setup when an Admin
Password is set.
Default: OFF
Password Bypass Bypass the System (Boot) Password and the internal hard drive password
prompts during a system restart.
Default: Disabled
Enable Non-Admin Password Changes Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON
Non-Admin Setup Changes
Enable UEFI Capsule Firmware Updates Enables or disables BIOS updates through UEFI capsule update packages.
Default: ON
Absolute Enables, disables or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
System setup 61