Installing the system board
Prerequisites
NOTE: The Service Tag of your computer is stored in the system board. Enter the Service Tag in the BIOS setup program
after you replace the system board.
NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program.
Make the appropriate changes again after you replace the system board.
About this task
The following image indicates the location of the connectors on your system board.
Figure 2. System-board connectors
1.
Power-button cable 2. Left fan cable
3. Left speaker cable 4. Keyboard cable
5. Right speaker cable 6. Antenna cables
7. Right fan cable 8. Display cable and camera cable
The following images indicate the location of the system board and provide a visual representation of the installation procedure.
46
Removing and installing components
To Next Page
Loading...
