Installing the PCIe holder
1 Align and place the PCIe holder to the system chassis.
2 Press the holder back until it clicks to the system.
3 Install the:
a side cover
4 Follow the procedure in After working inside your computer.
Heat sink and CPU fan assembly
Removing the heat sink and CPU fan assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a side cover
b air shroud
3 To remove the heat sink and CPU fan assembly:
a Disconnect the CPU fan cable [1] from the system board.
b Loosen the four heat sink captive screws [2], in the diagonal order (4, 3, 2, 1).
c Gently lift the heat sink and CPU fan assembly [3] from the system.
NOTE
: Lay the assembly with the thermal grease facing up.
Removing and installing components 45
To Next Page
Loading...
