No. Category Technology Browser Path
4 Audio Integrated Realtek ALC3234 High
Denition Audio Codec (2
Channel)
5 Network NIC Integrated RJ45
6 Graphics Radeon Pro WX
• 7100
• 5100
• 4100
• 3100
• 2100
NVIDIA
• Quadro P6000
• Quadro P5000
• Quadro P4000
• Quadro P2000
• Quadro P1000
• Quadro P620
• Quadro P400
7 Storage SATA
Dell UltraSpeed Quad (PCIE M.2
Interposer)
Dell UltraSpeed Duo (PCIE M.2
Interposer)
9 Remote Solutions Not supported with these CPUs
Teradici PCoIP
This section provides an overview of the host driver installation process.
Installing the Teradici PCoIP Card Host Dual/Quad
Install the PCoIP host driver software from dell.com/support.
NOTE
: You cannot upgrade the PCoIP host driver software while a VMware View-brokered PCoIP session is active between a
host workstation or host PC and VMware View client. Doing this will result in losing access to your mouse and keyboard when
the driver software is removed.
To upgrade the PCoIP host driver software in this type of deployment, do one of the following:
• Connect to the host from a zero client.
• Upgrade the software while connecting to the host through another desktop-remoting protocol such as RDP or VNC.
Installing the PCoIP Host Driver Software on a Host PC:
1 Download the PCoIP host driver software from the Teradici Support site (click Current PCoIP Product and Releases).
2 Log in to the administrative web interface for the host card.
3 From the Conguration > Host Driver Function menu, enable the Host Driver Function.
4 Restart the host PC.
5 Install the PCoIP host software package appropriate for the operating system installed on the host PC. You can start the install
process by double-clicking the installer:
a 64 bit: PCoipHostSoftware_x64-v4.3.0.msi (or later)
6 When the Welcome screen appears, click Next.
7 Accept the terms, and then click Next.
Technology and components
63
To Next Page
Loading...
