EasyManua.ls Logo

Dell Precision 5820 - Page 94

Dell Precision 5820
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power Light: Amber-White
Blinking
Amber/White Blinking Pattern Problem Description Suggested Resolution
2-3 2 amber blinks followed by a
short pause, 3 white blinks, long
pause, then repeats
No Memory
If customer can assist to
troubleshoot, narrow down
the issue by removing the
memory module one by one
to determine which one
failed and swapping to a
known good memory if
available to conrm.
Contact Tech Support
2-4 2 amber blinks followed by a
short pause, 4 white blinks, long
pause, then repeats
Memory/RAM failure
If customer can assist to
troubleshoot, narrow down
the issue by removing the
memory module one by one
to determine which one
failed and swapping to a
known good memory if
available to conrm.
Contact Tech Support
2-5 2 amber blinks followed by a
short pause, 5 white blinks, long
pause, then repeats
Invalid memory installed
Memory subsystem
conguration activity is in
progress. Memory modules
have been detected but
appear to be incompatible or
in an invalid conguration.
If customer can assist to
troubleshoot, narrow down
the issue by removing one by
one the memory on
motherboard to determine
which one failed.
Contact Tech Support.
2-6 2 amber blinks followed by a
short pause, 6 white blinks, long
pause, then repeats
Motherboard: Chipset
Fatal system board failure
detected.
If customer can assist to
troubleshoot, narrow down
the issue by removing one by
one the component on
motherboard to determine
which one failed.
If you identied any of the
components failed, replace
the Component.
Contact Tech Support.
3-2 3 amber blinks followed by a
short pause, 2 white blinks, long
pause, then repeats
PCI Device or Video
PCI device conguration
activity is in progress or PCI
device failure was detected.
If you can assist to
troubleshoot, narrow down
the issue by reseating PCI
card and removing one by
one to determine which card
failed.
Contact Tech Support.
3-3 3 amber blinks followed by a
short pause, 3 white blinks, long
pause, then repeats
BIOS Recovery 1
System is in Recovery Mode.
94 Troubleshooting

Table of Contents

Related product manuals