Steps
1. Insert the coin-cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the air shroud.
2. Install the system cover.
3. Follow the procedure in After working inside your computer.
Backplane cover
Removing the backplane cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the system cover.
About this task
The following images indicate the location of the backplane cover and provide a visual representation of the removal procedure.
38
Removing and installing components
To Next Page
Loading...
