Next steps
1. Install the system cover.
2. Follow the procedure in After working inside your computer.
Removing the power supply unit adapter
Remove the PSU adapter, when installing PSU with 86 mm wide form factor.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the system cover.
About this task
The following images indicate the location of the power supply unit adapter and provide a visual representation of the removal
procedure.
Steps
Loosen the screw and remove the power supply unit adapter.
Installing the power supply unit adapter
About this task
The following images indicate the location of the power supply unit adapter and provide a visual representation of the installation
procedure.
58
Removing and installing components
To Next Page
Loading...
