Dell Precision 7960 - Front Poweredge RAID Controller (PERC) Module; Removing the Front PERC Module

Steps
1. Align the backplane cover with the guide slots on the computer.
2. Slide the backplane cover to the front of the system until it fits into place.
Next steps
1. Install the system cover.
2. Follow the procedure in After working inside your computer.
Front PowerEdge RAID Controller (PERC) module
Removing the front PERC module
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the system cover.
3. Remove the backplane cover.
About this task
The following images indicate the location of the front PERC module and provide a visual representation of the removal
procedure.
Removing and installing components
41