Dell PRECISION T1650 - Installing the Memory; Removing the Coin-Cell Battery; Installing the Coin-Cell Battery

Figure 8.
Installing the Memory
1. Insert the memory module into the socket on the system board.
NOTE: Memory module must be installed beginning with the white tabbed sockets first.
2. Press down on the memory module until the retention-clips spring back to secure them in place.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer .
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) cover
b) expansion card(s)
3. Press the release latch away from the battery to allow the battery to pop-up from the socket and lift the coin-cell
battery out of the computer.
Figure 9.
Installing the Coin-Cell Battery
1. Place the coin-cell battery into its slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install the:
a) expansion card(s)
b) cover
4. Follow the procedures in After Working Inside Your Computer .
13