5. Remove the screws that secure the slim-optical drive to the drive cage.
6. Pull the slim-optical drive out from the computer.
Installing the Slim-Optical Drive (Optional)
1. Slide the slim-optical drive inside the drive bay, until the latch secures the drive.
2. Tighten the screws that secure the slim-optical drive to the drive cage.
3. Connect the data cable and power cables to the back of the optical drive.
4. Install the:
a) Front Panel
b) Cover
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Speakers
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the cover.
19