Dell Precision Tower 3620 - Optical Drive Removal and Installation

5. Flex the hard drive bracket and remove the hard drive from the hard drive bracket.
Installing the hard drive assembly
1. Insert the hard drive into the hard drive bracket.
2. Press the securing brackets and slide the hard drive assembly into the hard drive bay.
3. Connect the data cable and the power cable to the hard drive.
4. Install the cover.
5. Follow the procedure in After Working Inside Your Computer.
Removing the optical drive
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove:
a. cover
b. front bezel
3. Disconnect the data cable and the power cable from the optical drive.
10