Option Description
• UEFI
Advanced Boot Options Allows you to Enable Legacy Option ROMs
• Enable Legacy Option ROMs (Default: not enabled)
Date/Time Allows you to set the date and time. The changes to the system date and
time takes effect immediately.
Table 4. System configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Enable UEFI Network Stack
• Disabled
NOTE: You can use the Disabled option, only if Active Management
Technology (AMT) option is disabled.
• Enabled
• Enabled w/PXE (Default)
• Enabled w/Cloud Desktop
Serial Port Identifies and defines the serial port settings. You can set the serial port to:
• Disabled
• COM1 (Default)
• COM2
• COM3
• COM4
NOTE: The operating system may allocate resources even if the
setting is disabled.
SATA Operation Allows you to configure the internal SATA hard-drive controller. The
options are:
• Disabled
• AHCI
• RAID On (Default)
Drives Allows you to configure the SATA drives on board. The options are:
• SATA-0
• SATA-1
• SATA-2
• M.2 PCIe SSD-0
Default Setting: All drives are enabled.
SMART Reporting This field controls if the hard drive errors for the integrated drives are
reported during system startup. This technology is part of the SMART (Self
Monitoring Analysis and Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
27
To Next Page
Loading...
