Option Description
NOTE:
• The options displayed could be different depending on the
installed processor.
• The options depend on the number of cores supported by the
installed processor (All, 1, 2, N-1 for N-Core Processors)
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
Default Setting: Enable Intel SpeedStep
C-States Control Allows you to enable or disable the additional processor sleep states.
C states (This option is selected by default)
Limit CPUID Value This field limits the maximum value the processor Standard CPUID
Function will support.
• Enable CPUID Limit
Default Setting: The option is disabled.
Table 10. Power management
Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after a
AC power loss. You can set the AC Recovery to:
• Power Off (Default)
• Power On
• Last Power State
Auto On Time Allows you to set the time at which the computer must turn on
automatically. The options are:
• Disabled (Default)
• Every Day
• Weekdays
• Select Days
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled (Default)
• Enabled in S5 only
• Enabled in S4 and S5
Fan Control Override Allows you to control the speed of the system fan. The options are:
• Fan Control Override
Default Setting: The option is disabled.
USB Wake Support Allows you to enable USB devices to wake the system from standby.
• Enable USB Wake Support
Default Setting: The option is disabled.
31
To Next Page
Loading...
