Installing the Processor
1. Place the processor in its socket.
2. Replace the processor cover.
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever
needs to be opened first and which lever closes first.
3. Slide the first lever sideways into the retention hook to secure the processor.
4. Repeat step '3' to slide the second lever into the retention hook.
5. Install:
a. heatsink assembly
b. optical drive (required only for the installation of CPU1).
c. computer cover
6. Follow the procedures in After Working Inside Your Computer.
Removing the PCI Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the computer cover.
3. Open the plastic latch fastening the PCI card in its slot.
4. Press down the latch and pull the PCI card away from the computer.
29
To Next Page
Loading...
