Installing the PCI Card
1. Push the expansion card into the card slot and secure the latch.
2. Install the plastic latch that secures the PCI card to the card slot.
3. Install the computer cover.
4. Follow the procedures in After Working Inside Your Computer.
Removing the PCIe-Card Retention
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. computer cover
b. PCIe cards
3. Perform the following steps as shown in the illustration:
a. Unthread the cable from the clips [1].
b. Press and slide the latch out to release the PCIe-card retention [2].
c. Remove the PCIe-card retention out of the computer [3].
30
To Next Page
Loading...
