Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
Turn Off your computer and disconnect the power cable.
1.
Connect the VGA/HDMI/audio cable from your monitor to the computer.
2.
Plug the DC out cable of the wireless charging base to the power adapter port
3.
on the monitor. And plug the supplied power cable with 19V DC adapter to the
power adapter port on the wireless charging base.
Connecting the VGA cable (Optional Purchase)
To Next Page
Loading...
