Menu Select this option to adjust the settings of the OSD, such
as, the languages of the OSD, the amount of time the
menu remains on screen and so on.
Language Language options set the OSD display to one of the eight
languages (English, Spanish, French, German, Brazilian
Portuguese, Russian, Simplified Chinese, or Japanese).
Transparency Select this option to change the menu transparency by
pressing the
and buttons from 0 to 100.
Timer OSD Hold Time: sets the length of time the OSD will
remain active after the last time you pressed a button.
Use
or to adjust the slider in 1 second increments,
from 5 to 60 seconds.
Lock
Controls user access to adjustments. When Lock is
selected, no user adjustments are allowed. All buttons are
locked.
NOTE:
Lock – Either soft lock (through the OSD menu) or
∞
hard lock (press and hold the button beside the power
button for 10 seconds)
Unlock – Only hard unlock (press and hold the button
∞
beside the power button for 10 seconds)
Reset Menu Reset all OSD settings to the factory preset values.
To Next Page
