Setting up the monitor | 31
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the DisplayPort or HDMI cable, and the USB cable from your monitor to
the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: S2721DGFA default setting is DisplayPort 1.4. A DisplayPort 1.1
Graphic card may not display normally. Please refer to “product specific
problems – No image when using DP connection to the PC” to change
default setting.
Connecting the HDMI cable
HDMI
HDMI
To Next Page
Loading...
