16 | About your monitor
Electrical specifications
Video input signals • Digital video signal for each dierential line.
Each dierential line is rated at 100 ohm
impedance.
• DisplayPort/HDMI signal input support.
Input voltage/frequency/current 100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.50 A
(maximum)
In-rush current 120 V: 30 A (Max.)
240 V: 60 A (Max.)
Power consumption 0.20 W (Off mode)
1
0.21 W (Standby mode)
1
25.3 W (On mode)
1
56 W (Max.)
2
20.97 W (P
on
)
3
65.55 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
P
on
: Power consumption of On mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
To Next Page
Loading...
