Dell S2740L - Back View

Back View
Back View with monitor stand
Label Description Use
1
VESA mounting holes (100 mm x 100 mm
- behind attached VESA Plate)
Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm).
2 Regulatory label List the regulatory approvals.
3 Stand release button Release stand from monitor.
4 Service tag label Refer to this label to contact Dell for express service.
5 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
6 Cable management slot Use to organize cables by placing them through the slot.