CACStar User Guide Rev A27
Copyright 2017 Digital Imaging Technology Page 15
Email Setup
If you have elected to control MFD generated email with your CAC
cards, you will need to configure the item shown in the screen
below.
SMTP Address or Server Name
Set the IP address or Server Name of the SMTP server.
SMTP Port Number
Set the TCP port number for SMTP communications.
User Email Address From
Select the source location for the “From” email address. Emailed
scans can be from either the user’s own email address on his CAC
card, or from the user’s email address on the LDAP server.
To Next Page
Loading...
