Dell S2817Q User Manual

8 | About Your Monitor
Bottom View
Label Description Use
1 AC power connector To connect the monitor power cable.
2 USB downstream ports Connect your USB device. You can only use this
connector after you have connected the USB cable
to the computer and USB upstream connector on
the monitor.
3 USB upstream port Connect the USB cable that comes with your
monitor to the computer. Once this cable is
connected, you can use the USB downstream
connectors on the monitor.
4 Audio line-out port Connect speakers to playback audio coming
through HDMI or DP audio channels.
Only supports 2-channel audio.
NOTE: The audio line-out port does not support
headphones.
WARNING: Excessive sound pressure from
earphones or headphones can cause hearing
damage or loss.
5 HDMI (MHL) 1 port Connect your computer with HDMI cable or
portable device with MHL cable.
6 HDMI (MHL) 2 port Connect your computer with HDMI cable or
portable device with MHL cable.
7 DP connector (in) Connect your computer with DP cable.
8 mDP connector (in) Connect your computer with mDP to DP cable.

Dell S2817Q Specifications

General

Screen Size	28 inches
Resolution	3840 x 2160 (4K UHD)
Panel Type	TN
Refresh Rate	60 Hz
Brightness	300 cd/m²
Contrast Ratio	1000:1
Aspect Ratio	16:9
VESA Mount	100 x 100 mm
Inputs	1 x DisplayPort, 1 x Mini DisplayPort
Viewing Angle	170° (horizontal), 160° (vertical)
USB Ports	4 x USB 3.0
Power Consumption	45W (typical)
Color Support	1.07 Billion Colors (10-bit)