Why is color missing on my Dell Monitor?
If your Dell monitor is displaying missing color, try these solutions: * Perform the monitor self-test feature check. * Ensure that the video cable connecting the monitor to the computer is properly connected and secure. * Check the video cable connector for bent or broken pins.
How to resolve synchronization problems on a Dell S3221QS Monitor?
To resolve synchronization problems on your Dell monitor: 1. Reset the monitor to Factory Settings (Factory Reset). 2. Perform the monitor self-test feature check to see if the scrambled screen appears in self-test mode. 3. Check the video cable connector for bent or broken pins. 4. Restart the computer in safe mode.
How do I fix horizontal or vertical lines on my Dell S3221QS?
To address horizontal or vertical lines on your Dell monitor: 1. Reset the monitor to Factory Settings (Factory Reset). 2. Perform a monitor self-test feature check to determine if the lines appear in self-test mode as well. 3. Check the video cable connector for bent or broken pins. 4. Run the built-in diagnostics.
How to correct wrong color display on a Dell S3221QS Monitor?
To correct wrong color display issues on your Dell monitor: * Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application. * Try different Preset Modes in Color settings OSD. * Adjust R/G/B value in Custom Color in Color settings OSD. * Change the Input Color Format to RGB or YPbPr in the Color settings OSD. * Run the built-in diagnostics.
How to improve poor focus on a Dell Monitor?
If your Dell monitor has poor focus, try these steps: * Eliminate video extension cables. * Reset the monitor to Factory Settings (Factory Reset). * Change the video resolution to the correct aspect ratio.
How to troubleshoot brightness problems on a Dell S3221QS?
To troubleshoot brightness issues on your Dell monitor: * Reset the monitor to Factory Settings (Factory Reset). * Adjust brightness & contrast controls via the OSD.
Why is my Dell S3221QS Monitor video shaky or jittery?
If your Dell monitor's video is shaky or jittery: * Reset the monitor to Factory Settings (Factory Reset). * Check environmental factors that may be causing interference. * Relocate the monitor and test it in another room.
How to fix a Dell S3221QS Monitor with no video and the power LED off?
If your Dell monitor isn't displaying video and the power LED is off, try these steps: * Ensure the video cable connecting the monitor and computer is properly connected and secure. * Verify the power outlet is functioning correctly by testing it with other electrical equipment. * Make sure the power button is pressed. * Check that the correct input source is selected via the Input Source menu.
What causes intermittent problems on a Dell S3221QS Monitor?
For intermittent problems with your Dell monitor: * Ensure the video cable connecting the monitor to the computer is properly connected and secure. * Reset the monitor to Factory Settings (Factory Reset). * Perform the monitor self-test feature check to see if the issue occurs in self-test mode.
How to fix geometric distortion on a Dell S3221QS Monitor?
To correct geometric distortion on your Dell monitor: * Reset the monitor to Factory Settings (Factory Reset). * Adjust horizontal & vertical controls via the OSD.
General| Panel type | VA |
|---|---|
| Pixel pitch | 0.18159 x 0.18159 mm |
| Pixel density | 139 ppi |
| Backlight type | LED |
| Display diagonal | 32 \ |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Vertical scan range | 40 - 60 Hz |
| Maximum refresh rate | 60 Hz |
| Response time (fast) | 5 ms |
| Horizontal scan range | 29 - 170 kHz |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 3840p |
| Viewable size, vertical | 392.3 mm |
| sRGB coverage (typical) | 99 % |
| Contrast ratio (typical) | 3000:1 |
| Display number of colors | 1.073 billion colors |
| Viewable size, horizontal | 697.3 mm |
| Display brightness (typical) | 300 cd/m² |
| Supported graphics resolutions | 3840 x 2160 |
| Sustainability certificates | RoHS |
| USB hub version | 2.0 / 3.2 Gen 1 (3.1 Gen 1) |
| Built-in USB hub | Yes |
| DisplayPort version | 1.2 |
| Number of upstream ports | 3 |
| Tilt angle range | -5 - 21 ° |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| Feet color | Gold |
| Product color | Black, Grey |
| Front bezel color | Black |
| Heavy metals free | Hg (mercury) |
| Market positioning | Home |
| NVIDIA G-SYNC | - |
| RMS rated power | 10 W |
| Cables included | AC, HDMI, USB |
| Input current | 1.6 A |
| AC input voltage | 100 - 230 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (max) | 91 W |
| Annual energy consumption | 57 kWh |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 38.5 W |
| Package depth | 939.8 mm |
| Package width | 525.02 mm |
| Package height | 171.96 mm |
| Package weight | 15200 g |
| Operating altitude | 0 - 5000 m |
| Non-operating altitude | 0 - 12192 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
Weight and Dimensions| Bezel width (top) | 8.1 mm |
|---|---|
| Bezel width (side) | 8.2 mm |
| Depth (with stand) | 207 mm |
| Width (with stand) | 709.2 mm |
| Height (with stand) | 448.1 mm |
| Weight (with stand) | - g |
| Bezel width (bottom) | 24.4 mm |
| Depth (without stand) | 64 mm |
| Height (without stand) | 424.8 mm |
| Weight (without stand) | 7400 g |
To Next Page
