About your monitor │ 25
Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety instructions.
NOTE: Do not connect all cables to the monitor at the same time. It is
recommend to route the cables through the cable-management slot
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the HDMI or DisplayPort cable from your monitor to the computer.
Connecting the HDMI and DisplayPort 1.2 cable
HDMI 2.0 HDMI 2.0
HDMI 2.0
HDMI 2.0
DP 1.2
DP 1.2
3. Connect the power cables from your computer and monitor into a wall outlet.
2
1
To Next Page
